How to Check Signal Lamp Flasher
Flasher is a component that makes reting or turn signal lights blink automatically. Usually if you checked the light bulb and cord hub in good condition, the cause of death reting / turn signal lamp is damage to the Flasher. Stay aja check.
The trick is letting go of the cop Flasher cable. Then the cop had been connected directly with the cable wire. After that try turn a new reting interchangeably.
If the light is not blinking reting lit although it indicates there is damage to the Flasher. But if the lights reting die, then the damage not only on the Flasher but also on the connecting cables which must be corrected. Hopefully this information is useful for the bikers.
If the light is not blinking reting lit although it indicates there is damage to the Flasher. But if the lights reting die, then the damage not only on the Flasher but also on the connecting cables which must be corrected. Hopefully this information is useful for the bikers.
{ 0 komentar... read them below or add one }
Posting Komentar