Car Can't Start

Car Can't Start, "engine still warm and starter normal"

Have experienced difficulties in started the car, even though the engine condition "warm" and the voice sounded the starter's normal? Well, here are a few reasons why a car can not be turned on and how to overcome initial:

1.Make sure you have fuel in the car, no fuel and the car certainly will not light.
2.Another reason which might cause this is too much fuel mixture caused by the carburetor and fuel injection problems. To start the car in this condition you need fuel and ignisi terhantar at the right time.
3.Try checking ignisi system that may be caused by worn spark plugs. If the electrical current to the system ignisi terhantar not, then the machine will not light.
4.Also, if gasoline was not up to the cylinder, any machine will not light.
5.Another possibility is because the timing belt or chain or a timing adjustment an error.

To overcome this problem you can do:

1.For carburetor engines, press the accelerator and try to turn the starter for mengengkol machine. Try 1 to 2 minutes. Do not use this method for fuel-injection engine. Chill the car for a few hours and try to turn it on again. At the same time, try to check the manual to check the correct starting procedure.

2.If the above does not work, check whether the plugs are still flowing currents. Get out one spark plug wire and stick a screwdriver tip at the end of spark plug wires. Remember not to hold the parts which consist of iron. Make sure the handle of a screwdriver has been coated beforehand.

3.Electricity that might be created could reach 30 000 volts. Adjust the distance of the screwdriver 1 / 4 of a metal part machine. Ask someone to start the engine. Percak bluish flame will be seen between the screwdriver with metal part of the machine. If at any sparkplug percak blue is still there then the main problem seems to relate to fuel.